Roland fp-30 - Before You Play; Placing the FP-30 on a Stand; Connecting Equipment (Phones Jacks)

4
Placing the FP-30 on a Stand
If you want to place the FP-30 on a stand, use the Roland KSC-70 (refer to the KSC-70 Owner’s Manual) or KS-12.
* Be careful not to pinch your ngers when setting up the stand.
KS-12
Adjust the height of the stand to the lowest position.
Adjust the width of the stand
so that the rubber feet of the FP-30
straddle the stand.
Keyboard side
Top view
Before You Play
Note when placing the FP-30 on a stand
Place the FP-30 as directed in the owner’s manual (p. 4).
If it is not placed correctly, it may be unstable, causing it to fall
or overturn, and possibly resulting in personal injury.
Beware of overturning!
To prevent the FP-30 from overturning, do not apply excessive force to it,
and never sit or stand on it.
Connecting Equipment (Phones Jacks)
Phones 1/2 jacks
You can connect stereo headphones here.
If you connect amplied speakers, the sound of the FP-30
will be heard from the speakers.
Since the FP-30 has two headphone jacks, two people can
use headphones at the same time.
* You can also connect external speakers. If the sound is
distorted when external speakers are connected, slightly
lower the volume of the FP-30.
Headphones Amplied speakers