26
Chapter 1 Playing the Keyboard
■
Changing the Depth of Effect
You can select from ten levels of depth for the effect.
1.
Hold down the [Effects] button and press the [-] or [+] button.
The depth for the effect being applied to the currently selected tone appears
in the display.
fig.01-20
The next time you choose the same tone, the effect with the depth you’ve
selected here is applied.
■
Adding a Spinning Sound to Organ Tones (Rotary Effect)
The Rotary effect is applied to some Organ tones you can select with the
[Organ] button, and to the tone of the [Tone Wheel] button. When one of
these tones is selected, you can use the [Effects] button to change the speed
of the rotary effect.
What the rotary effect does is to add a “spinning” effect similar to the sound
of an organ using a rotating speaker.
1.
Press the [Organ] button and select the organ tone.
When a tone that has the Rotary effect added is selected, the [Effects]
button’s indicator flashes or blinks in green.
2.
Each time pressing the [Effects] button, switch the speed of
the rotary effect between rapid and slow rotation.
When the [Effects] button’s indicator flashes in green, a more rapid rotary
effect is applied.
When the [Effects] button’s indicator blinks in green, a slower rotary effect
is applied.
NOTE
You cannot change the
levels of depth for the
rotary effect.
To prevent the Rotary effect
from being applied, select an
effect type other than the
Rotary effect and then
remove the effect.
FP-5_e.book 26 ページ ２００５年１月２６日 水曜日 午前１０時２２分
To Next Page
Loading...
Need help?
General
