40
Performing
Disabling the Buttons (Panel Lock)
The Panel Lock function lets you disable all buttons.
In this state, the settings will not change even if you inadvertently touch a button while performing.
1. Hold down the [FUNCTION] button for several seconds.
Panel Lock will be activated.
A “lock” symbol is shown in the upper right of the display, and the panel will be locked.
To cancel Panel Lock, hold down the [FUNCTION] button once again for several seconds.
Panel Lock will also be cancelled when you turn o the power.
* If you activate Panel Lock while a song is playing or recording, playback or recording will stop.
* Under the following circumstances, Panel Lock cannot be activated.
• When the instrument is in Function mode (p. 64)
• When you’re in the demo song screen
• When something is being played by Session Partner
• When the Looper is being used
• When Audio Key is being used
To Next Page
Loading...
