61
Recording a Layered Performance (Looper)
Recording a Phrase
Here’s how to record a phrase.
If Using a Microphone
1. Connect your microphone (p. 76).
2. Adjust the microphone volume (p. 76).
3. If desired, turn on the microphone harmony (p. 76).
MEMO
Since the Looper records the sound by overdubbing, noise from the microphone might be more obtrusive.
If such noise is a problem, you can assign a pedal to switch the microphone input on/o (p. 72), and turn on the microphone input only when you
need to record the sound from the microphone.
Select a Looper Rhythm
1. Press the [DISPLAY] button a number of times to access the LOOPER screen.
2. Use the [-] [+] buttons to select the desired looper rhythm.
For more about the available looper rhythms, refer to “Looper Rhythm List” (p. 98).
* Since changing the Looper rhythm’s tempo will change the length of the phrase, it might not t within the available Looper recording time.
MEMO
You can choose which looper rhythm parts will sound (p. 67).
If the following screen appears
A conrmation message may appear if you attempt to select a dierent Looper rhythm or use a function other than the Looper before you’ve
saved the recorded phrase.
If it’s OK to erase the recorded phrase Press the TEMPO [+] button.
If you want to save the recorded phrase Press the TEMPO [-] button to store the recorded phrase into USB memory (p. 67).
To Next Page
Loading...
Need help?
General
