Roland Gaia SH-01 - LFO, Modulation, and Effect Parameters

47
AMP
Parameter Range Explanation Panel operation
LEVEL 0–127 Species the volume of the tone. Turn the [LEVEL] knob.
A 0–127 Species the attack time of the amp envelope. Move the [A] slider.
D 0–127 Species the decay time of the amp envelope. Move the [D] slider.
S 0–127 Species the sustain level of the amp envelope. Move the [S] slider.
R 0–127 Species the release time of the amp envelope. Move the [R] slider.
LFO
Parameter Range Explanation Panel operation
SHAPE
TRI, SIN, SAW,
SQR, S&H,
RANDOM
Selects the LFO waveform. Press the [SHAPE] button to choose.
TEMPO SYNC OFF, ON
Species whether the LFO rate will be synchronized
with the GAIA SH-01’s tempo.
Press the [TEMPO SYNC] button.
RATE
Species the rate of the LFO.
When TEMPO SYNC is OFF:
0–127
When TEMPO SYNC is ON:
16, 12, 8 (
), 4 ( ), 2 ( ), 1 ( ), 3/4 ( ), 2/3 ( ), 1/2 ( ), 3/8 ( ), 1/3 ( ),
1/4 (
), 3/16 ( ), 1/6 ( ), 1/8 ( ), 3/32, 1/12, 1/16, 1/24, 1/32
Turn the [RATE] knob.
FADE TIME 0–127
Species the time from when the tone begins
to sound until the LFO reaches its maximum
amplitude.
Move the [FADE TIME] slider.
PITCH DEPTH -63–+63
Species the amount of modulation applied to the
tone’s pitch.
Move the [PITCH DEPTH] slider.
FILTER DEPTH -63–+63
Species the amount of modulation applied to the
tone’s cuto frequency.
Move the [FILTER DEPTH] slider.
AMP DEPTH -63–+63
Species the amount of modulation applied to the
tone’s level.
Move the [AMP DEPTH] slider.
PAN DEPTH -63–+63
Species the amount of modulation applied to the
tone’s pan.
Hold down the [CANCEL/SHIFT] button and move the [AMP
DEPTH] slider.
MODULATION LFO
Parameter Range Explanation Panel operation
SHAPE
TRI, SIN, SAW,
SQR, S&H,
RANDOM
Species the LFO waveform.
1. Hold down the [CANCEL/SHIFT] button and move the
pitch bend/modulation lever away from yourself.
2. Press the [SHAPE] button to choose a waveform.
3. Press the [CANCEL/SHIFT] button.
TEMPO SYNC OFF, ON
Species whether the LFO rate will be synchronized
with the GAIA SH-01’s tempo.
1. Hold down the [CANCEL/SHIFT] button and move the
pitch bend/modulation lever away from yourself.
2. Press the [TEMPO SYNC] button.
3. Press the [CANCEL/SHIFT] button.