Roland Gaia SH-01 - System Parameters

51
System Parameters
Parameter Range Explanation Panel operation
OCTAVE SHIFT -3–+3
Shifts the keyboard pitch range in steps of one
octave.
1. Press the OCTAVE [UP/+] button.
The range will rise one octave each time you press the
button.
2. Press the OCTAVE [DOWN/-] button.
The range will fall one octave each time you press the
button.
TRANSPOSE SWITCH OFF, ON Turns Transpose on/o.
Press the [TRANSPOSE] button.
Button lit: ON
Button unlit: OFF
TRANSPOSE VALUE -5–+6
Species the range (in semitones) by which the
Transpose function will shift the keyboard.
1. Hold down the [TRANSPOSE] button and press the OCTAVE
[UP/+] button.
The pitch will rise by a semitone each time you press the
button.
2. Hold down the [TRANSPOSE] button and press the OCTAVE
[DOWN/-] button.
The pitch will fall by a semitone each time you press the
button.
• If you hold down the [TRANSPOSE] button and press the
OCTAVE [UP/+] button and OCTAVE [DOWN/-] button
simultaneously, the pitch will return to the normal range.
KEYBOARD VELOCITY REAL, FIX
Species the velocity value that is transmitted when
you play a key.
If this is set to FIX, the velocity value will be xed.
1. Hold down the [CANCEL/SHIFT] button and press the [KEY
HOLD] button.
Button lit: FIX
Button unlit: REAL
PEDAL POLARITY
STANDARD,
REVERSE
Switches the polarity of the pedal.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [PORTAMENTO] button and press the
[PRESET PATCH] button or the [USER PATCH] button.
PRESET PATCH lit: REVERSE
USER PATCH lit: STANDARD
3. Press the [CANCEL/SHIFT] button.
D BEAM SENS 1–8
Adjusts the sensitivity of the D BEAM controller.
Higher values will make the D BEAM respond more
easily.
1. Hold down the D BEAM [EFFECTS/ASSIGN] button and
press one of the NUMBER [1]–[8] buttons.
LOCAL SW OFF, ON Turns the Local switch on/o.
1. Hold down the [CANCEL/SHIFT] button and press the
[CENTER CANCEL] button.
Button lit: ON
Button unlit: OFF
MASTER LEVEL 0–127 Species the volume of the entire GAIA SH-01.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Turn the [LEVEL] knob.
3. Press the [CANCEL/SHIFT] button.
MASTER TUNE
415.30–466.20
(Hz)
Species the reference pitch of the entire GAIA
SH-01.
The setting indicates the frequency of the A4 key.
Hold down the [CANCEL/SHIFT] button and turn the [PITCH]
knob.
PATCH REMAIN OFF, ON
If this is on, currently sounding notes of the patch
will continue when you select another patch.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [KEY HOLD] button and press the [EFFECTS
ON/OFF] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.