Roland Gaia SH-01 - Page 50

50
Parameter Range Explanation Explanation Panel operation
[PITCH SHIFTER]
Pitch -12–+12
Adjusts the amount of pitch shift in
semitone steps.
Turn the [CONTROL 1] knob.
Detune 0–50 [cent]
Make ne adjustments to the pitch
shift.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
Pitch
-12, -7, -5, -2,
-1, 0, +1, +2,
+5, +7, +12
Selects the amount of pitch shift.
Hold down the [CANCEL/SHIFT] button and turn the [LEVEL]
knob.
Level 0–127 Adjusts the volume. Turn the [LEVEL] knob.
[DELAY]
Time 0–127 This determines the delay time. Turn the [CONTROL 1] knob.
Feedback 0–127 Adjusts the amount of feedback.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
High Damp -36–0 [dB]
Adjusts the amount of high-
frequency damping.
Hold down the [CANCEL/SHIFT] button and turn the [LEVEL]
knob.
Level 0–127 Adjusts the volume. Turn the [LEVEL] knob.
[PANNING DELAY]
Time 0–127 This determines the delay time. Turn the [CONTROL 1] knob.
Feedback 0–127 Adjusts the amount of feedback.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
High Damp -36–0 [dB]
Adjusts the amount of high-
frequency damping.
Hold down the [CANCEL/SHIFT] button and turn the [LEVEL]
knob.
Level 0–127 Adjusts the volume. Turn the [LEVEL] knob.
[REVERB]
Time 0–127 Adjusts the reverberation time. Turn the [CONTROL 1] knob.
Type
ROOM, PLATE,
HALL
This selects the reverb type.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
High Damp 1–100 [%]
Adjusts the amount of high-
frequency damping.
Hold down the [CANCEL/SHIFT] button and turn the [LEVEL]
knob.
Level 0–127 Adjusts the volume. Turn the [LEVEL] knob.
Shared in Common Patch Level 0–127 Adjusts the volume of the patch.
Hold down the [EFFECTS ON/OFF] button and turn the [LEVEL]
knob.