57
Saving All User Data to USB Memory
When you execute this operation, all (64) patches from the
GAIA SH-01’s user memory, all (8) phrases, as well as the
system data, will be saved to USB memory. This operation
is called “backing up.”
1. While holding down the [CANCEL/SHIFT] button,
press the [TONE COPY] button and the USB
MEMORY [PATCH] button simultaneously.
The [CANCEL/SHIFT] button, [TONE COPY] button, and
USB MEMORY [PATCH] button will blink.
If you decide to cancel the operation, press the [CANCEL/
SHIFT] button.
2. Press the [TONE COPY] button and USB MEMORY
[PATCH] button simultaneously.
Data for the 64 patches, 8 phrases, and the system data will
all be backed up as a single le.
Restoring All Data from USB Memory
to the GAIA SH-01
When you execute this operation, all (64) patches, all (8)
phrases, and the system data that was backed up on USB
memory will be restored to the GAIA SH-01’s user memory.
This operation is called “restoring.”
1. While holding down the [TONE COPY] button
and the USB MEMORY [PATCH] button, press the
[WRITE] button.
The [WRITE] button and the [CANCEL/SHIFT] button will
blink.
If you decide to cancel the operation, press the [CANCEL/
SHIFT] button.
2. Press the [WRITE] button.
NOTE
All user data will be rewritten when you execute this
restore operation. If the GAIA SH-01 contains important
data that you want to keep, you must save it to other USB
memory before you execute the restore operation.
To Next Page
Loading...
