Roland GR-20 - Using the Foot Pedal to Sustain the Sound (HOLD); Using the Expression Pedal to Modify the Sound (EXP PEDAL); Turning the Power off

16
Chapter 1 Play the Sounds!
Using the Foot Pedal to
Sustain the Sound (HOLD)
You can press the HOLD pedal to sustain the synth sound
you're playing. The effect will depend on the sound, and you
can also adjust the effect to your taste (p. 23).
fig.1-13(HOLD)
* The HOLD indicator will blink while you are pressing the
pedal.
Using the Expression Pedal
to Modify the Sound
(EXP PEDAL)
You can use the expression pedal to continuously vary the
volume or tone of the synth sound.
The effect will depend on the sound, and you can also adjust
the effect to your taste (p. 23).
fig.1-14(EXP)
Turning the Power Off
When you’re ready to turn off the power, be sure to do so in
the following order.
1. Turn off the power of your amp.
2. Turn off the power of the GR-20.
3. Turn off the power of the device connected to MIX IN.
GR-20_e.book 16 ページ ２００７年７月２日 月曜日 午後１２時５３分