17
Chapter 2. Playing Patterns
Chapter 2
Muting individual rhythm sounds
The instruments used within part R can be muted (silenced)
individually. A certain category of instrument, such as bass
drum (BD) or snare drum (SD) can be muted as a group.
1. Simultaneously press [PART SELECT] and [PART
MUTE].
[PART SELECT] and [PART MUTE] will light, and part
buttons [R] and [1]–[7] will function as Rhythm Tone
Mute buttons ([BD]–[OTHERS]).
2. Press the [BD]–[OTHERS] button for the part that you
wish to mute, making the indicator blink.
The corresponding rhythm instrument will be muted.
3. To cancel muting, once again press the button of the
muted part, making it light.
Association of rhythm groups and buttons for muting
them
• BD: Bass Drum
• SD: Snare Drum
• HH: Hi-Hat
• CLP: Hand Claps
• CYM: Cymbal
• TOM/PERC: TomTom/Percussion
• HIT: hit such as a one-shot SFX sound.
• OTHERS: Other instruments
* If you would like to know which instrument is muted by
muting a particular rhythm group?
➔ Preset Rhythm Set List (p. 86)
* Using the part muting function to mute Part R mute all
rhythm tones regardless of the settings for respective rhythm
tones.
Applying the mute status to the next
pattern as well (Mute Remain)
This operation is used to maintain the muting mode for
playing back the next part. It is useful, for example, to play
back the next pattern with the rhythm track muted by
maintaining the current setting.
1. Hold down [PART MUTE] and press [HOLD].
[PART MUTE] will begin flashing.
* If you once again hold down [PART MUTE] and press
[HOLD], this function will be cancelled.
2. Turn [VALUE] to select the next pattern.
After a time, the newly selected pattern will begin
playing, using the current Part Mute settings.
* Mute Remain will be cancelled automatically.
Using D-FIELD to mute
By using D-FIELD you can perform the following mute
operations (p. 25).
• Mute all parts at once
• Put only one specific part in playback mode
• Reverse the status of muted parts versus playing parts
• Fade in/out only a specific part
• Fade in/out all parts
• Put only the bass drum and bass in playback mode
To Next Page
Loading...
Need help?
General
