Roland Groovebox D2 User Manual

52
Chapter 4. Applying Effects to the Sound (Effects)
16. Space-D (Add Transparent Depth)
This is a type of chorus, but unlike a conventional chorus, it does not create a sense of modulation.
* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note
triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)
* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)
17. Tetra Chorus (Layer Chorus Sounds to Add Spaciousness)
This effect layers four chorus sounds to produce even more depth and spaciousness than a conventional chorus.
* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note
triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)
* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)
Screen Parameter Explanation Value
PRE DELAY
(Pre Delay Time)
Specifies the time from the original sound until the chorus sound is
heard.
0.0–100
DEPTH Specifies the depth of modulation. 0–127 Y
PHASE Adjusts the spread of the sound.As this value is increased, the
sound will have a broader left/right spread.
0–180
RATE Specifies the rate of modulation. If a note value or measure is select-
ed as the value of this parameter, the Rate will synchronize with the
BPM of the pattern at intervals of the specified note value or mea-
sure.
0.1–10.0 (Hz), notes
(*1), measures (*2)
X
LOW GAIN Adjusts the boost or cut of the low frequency range. -15–15
HIGH GAIN Adjusts the boost or cut of the high frequency range. -15–15
BALANCE
(Effect Balance)
Adjusts the volume balance between the original sound and the
chorus sound.With a setting of “0,” no chorus sound will be output.
0–100 (%)
OUTPUT LEVEL Specifies the output volume from the Space-D effect. 0–127
Screen Parameter Explanation Value
PRE DELAY
(Pre Delay Time)
Specifies the time from the original sound until when the
chorus sound is heard.
0.0–100
DEPTH Specifies the depth of modulation. 0–127
PRE DELAY DEVI
(Pre Delay Deviation)
Adjusts the difference in pre delay between each of the cho-
rus sounds.
0–20
RATE Specifies the rate of modulation. If a note value or measure
is selected as the value of this parameter, the Rate will syn-
chronize with the BPM of the pattern at intervals of the spec-
ified note value or measure.
0.1–10.0 (Hz), notes (*1),
measures (*2)
X
DEPTH DEVI
(Depth Deviation)
Adjusts the difference in modulation depth between each of
the chorus sounds.
-20–20
PAN DEVI Adjusts the pan difference between each chorus sound.As
this value is increased, the sound will have a greater left/
right spread.
0–20 Y
BALANCE
(Effect Balance)
Specifies the volume balance between the original sound
and the chorus sound.With a setting of “0,” no chorus sound
will be output.
0–100 (%)
OUTPUT LEVEL Specifies the output volume from the Tetra Chorus effect. 0–127

Roland Groovebox D2 Specifications

General

Brand	Roland
Model	Groovebox D2
Category	Music Mixer
Language	English