17
Chapter 2. Performance
1
Hold down the [Tone] and [Metronome] buttons and press the “C ” or
“D ” key.
The volume balance changes.
Hold down the [Tone] and [Metronome] buttons and press the “C ” key to lower
the volume of the Dual Tone.
Holding down the [Tone] and [Metronome] buttons and pressing the “D ” key
raises the Dual Tone volume.
To return to the original volume balance, hold down the [Tone] and [Metronome]
buttons and press both the “C ” and “D ” keys simultaneously.
Using Metronome
■
Sounding the Metronome
The HP101 features a built-in metronome.
fig.panel2-4
1
Press the [Metronome] button, getting its indicator to light.
The metronome will sound.
The button flashes in red and green in time with the beat selected at that time. The
button lights in red on the downbeats, and in green on weak beats.
Stopping the metronome
2
Once again press the [Metronome] button, getting the button to go dark.
The metronome will stop.
You can change the Dual
Balance by pressing any “C ”
or “D ” key.
The beat is set to “weak beats
only” when the power is
turned on. When the beat is set
to “weak beats only,” the
[Metronome] button only
flashes in green.
HP101_e.book 17 ページ ２００４年８月３１日 火曜日 午後２時１１分
To Next Page
Loading...
Need help?
General
