24
Chapter 3. Changing Various Settings
Disabling Everything Except
Piano Play (Panel Lock)
The “Panel Lock” function locks the HP101 in a state where
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
In the Panel Lock state, only the grand piano sound can be
played.
1.
Turn the volume to the minimum, and press the [Power
On] switch to turn off the power.
2.
Hold down the [Tone] button and press the [Power On]
switch to turn on the power.
All buttons are disabled.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
To defeat the Panel Lock function, turn the volume
down to the minimum, and turn on the power once
again.
Using the V-LINK function
Connecting the HP101 to a V-LINK compatible image device
allows you to control the images with the HP101.
V-LINK
V-LINK ( ) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
* V-LINK ( ) is a trademark of Roland
Corporation.
How to Use the V-LINK
V-LINK is set to OFF when the instrument is turned on.
1.
While holding down the [Metronome] and [Reverb/
Key Touch] buttons, the “G 7” note to turn the setting
On, or press the “G7” note to turn the setting Off.
* While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
All button indicators light up when the V-LINK function is
on.
C1
While holding down the [Tone] button,
press the [Power On] switch.
Key
Values Descriptions
G7
Off The V-LINK function is switched off.
G7
On
The V-LINK function is switched on.
You can control images using the
twelve keys at the left end of the key-
board.
C7C6 C8
V-LINK
Off
V-LINK
On
G7
Press
While holding down
two buttons...
HP101_e.book 24 ページ ２００４年８月３１日 火曜日 午後２時１１分
To Next Page
Loading...
Need help?
General
