20
Press F6 (EXEC).5
When the JUNO-G asks if you’re sure, press F6 (EXEC) again—the 6
sample is assigned to the designated pad.
Playing the Sample Pads
On the PATCH PLAY or PERF PLAY screens, hold down SHIFT and press 1
the RHYTHM button to activate the pads. When you do this, labels
appear onscreen just above the F buttons to show that they’re now
functioning as sample pads.
In their normal state, the F1-F6 act as Pads 1-6. To make them operate
as Pads 7-12, press the BASS button.
Play your sample on Pad 1.
2
Sequencing with the Sample Pads
Sequencing from the sample pads is pretty much the same as sequencing
from the JUNO-G keyboard, with just a couple of differences.
Activate the sample pads—as we just did—before sequencing.
1
As you sequence, when the Realtime Rec Control window opens, 2
press F6 (CLOSE) to close the window so you can use the F buttons
as sample pads.
When you sequence from the pads, your playing is captured on MIDI Track
10.
Saving Samples
Until you save a sample, it exists only in temporary memory. This means that
if you power off, the sample goes away forever. To learn how to save samples,
see Page 14 in the JUNO-G Version 2 Supplementary Manual.
The End
We hope you’ve found this workshop helpful. Keep an eye out for new
JUNO-G updates and support documents you can download for free from
www.RolandUS.com.
To Previous Page
Loading...
