59
Playing in Performance Mode
The JUNO-G has three performance groups, including the User
group, Preset groups and Memory Card groups.
USER
This is the group inside the JUNO-G which can be rewritten.
Performances you yourself create can be stored in this group. The
JUNO-G contains 64 preset performances.
PRST (Preset)
This is the group inside the JUNO-G which cannot be rewritten.
However you may modify the settings of the currently selected
performance, and then store the modified performance in User
memory. The JUNO-G contains 64 preset performances.
CARD (Memory Card)
This group lets you use patches stored on a memory card inserted in
the rear panel PC card slot. Since the data in this group can be
rewritten, you can use this group to store patches that you create.
1.
Press [PERFORM].
2.
Press [ ] [ ] to move the cursor to the performance group.
fig.PfmSelect.e
3.
Use the VALUE dial, or [INC] [DEC] to select a performance group.
4.
Press [ ] [ ] to move the cursor to the performance number.
5.
Use the VALUE dial or [INC] [DEC] to select the
performance number.
You can display a list of performances and select a performance from
that list.
1.
Press MODE [PERFORM] to access the PERFORM PLAY screen.
2.
Move the cursor to the performance group or performance
number.
3.
Press [ENTER].
The PERFORMANCE LIST screen appears.
4.
To switch the performance group, press [ ] [ ].
5.
Use the VALUE dial, [INC] [DEC], or
[] []
to select the
performance.
6.
Press [F6 (SELECT)] or [ENTER] to finalize your choice.
You can bring together your favorite and most frequently used
performances in one place by registering them in the Favorite
Performance. By using this function you can quickly select your
favorite performances.
1.
Press MODE [PERFORM] to access the PERFORM PLAY
screen.
2.
Move the cursor to the performance group or performance
number.
3.
Press [ENTER] and then press [F1 (FAVORIT)].
The FAVORITE PERFORMANCE screen appears.
4.
Use the VALUE dial, [INC] [DEC], or
[] []
to select a
performance number.
To switch banks, press [ ] [ ].
5.
Press [F6 (SELECT)] or [ENTER] to finalize your choice.
Registering a Favorite Performance
You can register a total of 64 Performances (8 sounds x 8 banks) as
favorite Performance.
1.
Select the Performance that you wish to register.
2.
Access the FAVORITE PERFORMANCE screen.
3.
Press [ ] [ ] to select the bank in which you wish to
register the Performance.
4.
Use the VALUE dial, [INC] [DEC], or
[] []
to select the
number to which you wish to register.
5.
Press [F3 (REGIST)] to execute the registration.
* To cancel, press [EXIT].
By pressing [F2 (REMOVE)] you can cancel the Performance
registration that is selected in the FAVORITE PERFORM screen.
Selecting a Performance
Selecting Performances from the List
Performance number
Performance group
Selecting Favorite Performances
JUNO-G_e.book 59 ページ ２００６年２月１３日 月曜日 午後２時４４分
To Next Page
Loading...
