3.
Rhythm Edit Mode
J EFFECT
Chorus Rate
Range:
o
—
1 27
This detemimes the speed of the modulation of the chorus
sound. The greater the value, the faster (he modulation.
VJMpl
Chorus Depth Range:
—
1 27
This determines the depth of
the modulation
of
the
chorus sound. The
greater the value, the deeper the modulation.
I
•!
:«
Chorus Feedback Range:
—
1 27
This determines the level of the re-routed (feedback) chorus sound. A richer, more
complex chorus effect can be
gained by boosting this parameter.
[•mi
Output Switch Settings: MIX/REV
This determines the destination of the chorus sound output.
When
set to MIX, the
chorus sound and the reverb sound
are mixed
with the dry sound; when set to REV, the chonis
sound is
mixed with the diy signal after
reverb
is
applied.
PERFORM
REUERB
t Type
ROOM!
Level I
186 1
Tilr-ie I F-Back
60 i 20
O
Reverb Type Settings: ROOM
1
—2/STAGEl —2/HALLI —2/DELAY/PAN
—
DLY
This determines the
type
of
reverb.
R00M1
Reverb with short and dense reverberant
wash
R00M2 Reverb with short and sparse reverberant wash
STAGE1 Reverb with strong reverberant wash in the final
STAGE2 portion of the sound
HALL1 Reverb with strong initial reflections
HALL2 Reverb with clear echo
DELAY Reverb with rich echo
PAN
-
DLY Conventional delay
Reverb Level Range:
—
1 27
This determines the
level
or volume of the
reverb
sound. The greater the value, the
greater
the
level.
Reverb Time Range:
—
1 27
When ROOM 1
—
HALL
2 is
selected
as
the reverb type,
this determines
the time of the
reverberant sound; when
DELAY/PAN-DLY is selected, this determines the delay time.
Delay Feedback Range:
—
- 1 27
When the type is set to DELAY, this determines the re-routed
level
(feedback) of the
delay sound in the delay.
Increasing this setting creates an echo effect of distinct multiple repeats of the sound.
142
To Next Page
Loading...
