Roland LEC-300 - Installing the Ink Cartridges (LEC-330; LEC-540; LEJ-640); Ink Mode; Filling with Ink for the First Time; Affixing the Cartridge-Slot Labels

9
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640)
Ink Mode
In the case of LEC-330 / LEC-540 / LEJ-640, you need to select the ink mode in accordance with the ink type.
 P.11, "Selecting the Ink Mode"
 ECO-UV gloss/gloss mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.
 ECO-UV white/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two white ink cartridges.
 ECO-UV gloss/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge and one
white ink cartridge.
 ECO-UVS ink mode
This mode uses cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink cartridges.
Filling with Ink for the First Time
When installing ink cartridges for the rst time, clean the print heads with the cleaning solution, and then ll
with ink of each color. This operation requires four SOL INK cleaning cartridges.
This operation requires four UNUSED SOL INK cleaning cartridges.
Never under any circumstances use anything other than the specied type of ink or cleaning uid.
Afxing the Cartridge-slot Labels
Procedure

Open the ink cartridge cover.
Hold the knob.
Knob