Roland LEC-300 - Page 8

Installing the Ink Cartridges (LEC-300A)
6

Make sure the drain bottle is installed.
Press
.

Insert the SOL INK cleaning cartridges into slots 1, 2, 3, and
4.

When this screen appears, pull out the SOL INK cleaning
cartridges.
Insert the SOL INK cleaning cartridges you pulled out into
slots 5 and 6.

When this screen appears, pull out the SOL INK cleaning
cartridges.

When this screen appears, cleaning is nished.
Make sure the drain bottle is installed, and press
.
INSTALL
DRAIN BOTTLE
SET CL-LIQUID
1 2 3 4
FILLING INK...
>>
REMOVE CL-LIQUID
1 2 3 4
SET CL-LIQUID
5 6
FILLING INK...
>>>>
REMOVE CL-LIQUID
5 6
FILLING INK...
>>>>>>>>
CHECK
DRAIN BOTTLE