Roland Metaza MPX-50 - Installing Dr. METAZA

12
Part 1 What to Do Before Marking
System requirements
Computer Personal computer running Windows 95 or Windows 98
CPU If you're using Windows 95: i486SX or better (Pentium 100MHz recommended)
If you're using Windows 98: i486DX or better (Pentium 100MHz recommended)
System Memory If you're using Windows 95: 8 MB or more (64 MB or more recommended)
If you're using Windows 98: 16 MB or more (64 MB or more recommended)
Hard Disk 5 MB or more of free space
1
Place the included CD-ROM in the CD-ROM drive.
The Setup menu appears automatically.
2
Click [Dr.METAZA Install].
The Setup program starts.
Installing Dr. METAZA
Dr. METAZA is a program for using Metaza to mark images on the surface of materials. This program runs under Windows 95 or
Windows 98.
3
Follow the messages to carry out setup and finish
setting up the program.
When installation is completed, remove the CD-ROM from the CD-ROM drive.
Continue by making the settings for Dr. METAZA.