To Next PageTo Next PageWhat to do if Roland CAMM-1 PNC-1610 Printer shows 'Pen Change : Pen No. Press Pause key'?
If the Roland Printer displays 'Pen Change : Pen No. Press Pause key', and you don't need to change the tool, simply press the key without making any changes. Alternatively, you can turn the [TOOL STOP] setting to [OFF] in the control panel to prevent this message from appearing again.
Why does my Roland CAMM-1 PNC-1610 say 'Too Big Data Can not Replot'?
If you encounter a 'Too Big Data Can not Replot' error on your Roland Printer, it means the amount of cutting data exceeds the data buffer capacity.
How to fix a Baudrate Error on a Roland CAMM-1 PNC-1610?
If you get a Baudrate Error on your Roland Printer, turn off the power, and then turn it back on before transmitting data from the computer again.
Explains the meaning of symbols used in the manual for warnings and notes.
Provides essential safety precautions for operating the equipment, covering handling, installation, and general warnings.
Describes the location and meaning of safety labels affixed to the unit and stand.
Offers guidelines for proper installation, handling, and environmental conditions.
Verifies all included accessories are present before use.
Identifies and describes the main components of the cutting machine, including front view, side view, and control panel.
Outlines the step-by-step procedure for operating the unit to perform cutting.
Covers stand assembly, machine mounting, and establishing computer connections.
Demonstrates methods for attaching various materials to the cutting table, including CP-A3, tape, and glue.
Guides on safely installing and removing blades in the tool holder, covering different procedures.
Explains how to define the boundaries for cutting operations, including setting LL and UR points.
Covers optimal settings for force, speed, and offset, including performing cutting tests, checking values, and adjusting parameters.
Provides a guide to recommended blades and materials for cutting.
Explains the process of transferring cutting data from a computer.
Covers post-cutting procedures like moving the carriage and powering off.
Visual representation of the machine's menu navigation structure.
Detailed explanation of various menu options and their functions, including setting area, status, offset, force, and speed.
Covers using plotter pens to draw on paper before cutting.
Provides instructions for cleaning and maintaining the unit.
Offers solutions for common error messages and operational problems, including specific error codes and general troubleshooting steps.
Details the instruction language and commands used by the CAMM-GL III system.
Describes the technical specifications for parallel and serial interfaces, including pinouts and device control instructions.
Lists the overall technical specifications and features of the PNC-1610, including dimensions, weight, and interface details.
General