Roland SOLJET PROIII XC-540 User Manual

USER'S MANUAL
Thank you very much for purchasing this product.
○ To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
○ Unauthorized copying or transferral of this manual, in whole or in part, is prohibited.
○ The contents of this document and the specications of this product are subject to change without notice.
○ The documentation and the product have been prepared and tested as much as possible. If you nd any misprint
or error, please inform us.
○ Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of
this product, regardless of any failure to perform on the part of this product.
○ Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect
to any article made using this product.

Roland SOLJET PROIII XC-540 Specifications

General

Maximum Resolution	1440 dpi
Print Speed	Up to 32.3 m²/h (347.6 sq. ft./h)
Print Technology	Piezo inkjet
Media Width	210 to 1371 mm
Colors	CMYK
Media Handling	Roll feed
Connectivity	USB, Ethernet
Printing Technology	Piezoelectric inkjet
Print Resolution	1440 dpi
Maximum Print Width	1346 mm
Ink Colors	CMYK
Media Thickness	Maximum 1.0 mm
Interface	USB, Ethernet
Power Requirements	AC 100 to 120 V ±10% 50/60 Hz or AC 220 to 240 V ±10% 50/60 Hz
Ink Type	Eco-Sol MAX

Summary

Safety Information

General Safety Precautions

General warnings about incorrect operation, handling, environment, and clothing.

Electrical Safety Hazards

Warnings about electrical shock, fire, and proper grounding.

Fire and Chemical Hazards

Hazards related to ink, cleaning fluid, flammable materials, and storage.

Physical Hazards and Warnings

Warnings about high temperatures, heavy weight, moving parts, and pinch hazards.

Chapter 2 Basic Operation

2-1 Switching the Power On and Off

Step-by-step guide for powering the machine on and off, including power-saving features.

2-2 Loading and Cutting Off Media

Procedures for loading media rolls and cutting off media from the roll.

2-4 Starting Output

Steps to prepare the machine and computer for receiving data and starting print jobs.

2-5 If Ink Runs Out

Procedures for checking ink levels and replacing ink cartridges to resume printing.

Chapter 3 Using the Cutting Feature

3-1 Performing Cutting

Instructions for performing cutting operations, including tests and blade force settings.

Chapter 4 Operation of the Media Take-up System

4-1 The Take-up System

4-2 Using the Take-up System

Chapter 5 Maintenance and Adjustment

5-1 Daily Care and Maintenance

Routine procedures for cleaning, disposing of discharged ink, and print head care.

5-2 When Head Cleaning Is Not Effective

Advanced head cleaning methods when normal cleaning does not resolve issues like dot drop-out.

5-3 Cleaning the Heads Using the Cleaning Kit

Step-by-step guide to cleaning print heads using the provided cleaning kit for optimal printing.

5-4 Replacing Consumable Parts

Instructions for replacing parts like wipers, blades, and separating knives when they wear out.

Chapter 7 What to Do If

7-1 The Machine Doesn't Run

7-2 Attractive Printing or Cutting Is Impossible

7-3 The Media Jams

7-5 Media Wrinkles or Shrinks, or Feed Is Unstable

7-6 The Print Heads Stopped Moving

7-8 If an Error Message Appears