D
Daniel RileyAug 4, 2025
What to do if my Roland Soljet Pro III XJ-640 uses the wrong profile for the media?
- EEric CampbellAug 4, 2025
If your Roland Printer is using the wrong profile for the media, you should select and use the suitable profile.
What to do if my Roland Soljet Pro III XJ-640 uses the wrong profile for the media?
If your Roland Printer is using the wrong profile for the media, you should select and use the suitable profile.
What to do if FEED CALIBRATION is not correct on Roland Soljet Pro III XJ-640?
If the FEED CALIBRATION is not correct on your Roland Printer, apply the correct calibration settings.
How to adjust the scanning distance of the Head Carriage on a Roland Soljet Pro III XJ-640?
To adjust the scanning distance of the Head Carriage on your Roland Printer, set the [FULL WIDTH S] to [FULL].
What to do if there are foreign substances inside my Roland Soljet Pro III XJ-640 Printer?
If you find foreign substances inside your Roland Printer, perform a manual cleaning.
| Print Technology | Piezo inkjet |
|---|---|
| Maximum Print Width | 64 inches |
| Maximum Resolution | 1440 x 1440 dpi |
| Ink Type | Eco-solvent ink |
| Media Types | Vinyl, banner, paper, canvas |
| Media Width | 64 inches |
| Media Thickness | Up to 1.0 mm |
| Connectivity | USB 2.0, Ethernet |
| Power Requirements | AC 100-240V, 50/60Hz |












Loading...