Roland SolJet PROII SC-540 User Manual

Thank you very much for purchasing the product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
• The contents of this operation manual and the specifications of this product are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any
misprint or error, please inform us.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through
use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with
respect to any article made using this product.
USER’S MANUAL

Roland SolJet PROII SC-540 Specifications

General

Maximum Print Width	54 inches
Print Resolution	1440 x 1440 dpi
Ink Type	Eco-Sol MAX
Print Technology	Piezo inkjet
Ink Colors	Cyan, Magenta, Yellow, Black
Media Handling	Roll-fed
Media Thickness	Up to 1.0 mm
Interface	USB, Ethernet
Power Requirements	100-240V, 50/60Hz
Operating Environment	20 to 30°C, 35 to 80% RH

Summary

1. Getting Started

1-3 Assembling and Installing

Covers setting up the machine, including environment and physical assembly.

1-4 Connecting the Cables

1-5 Switching On the Power for the First Time

Guide for initial power-on and ink cartridge installation.

1-6 Installing the Blade

Step-by-step procedure for installing and removing the cutting blade.

To Ensure Safe Use

General Safety Precautions

Covers electrical, handling, and environmental safety warnings.

2. Basic Operation

2-2 Switching the Power On and Off

2-3 Loading Media

Procedures for loading roll and sheet media, and handling specific media types.

2-4 Printing

Steps for performing printing, including tests and data download.

2-5 Cutting

Procedures for performing cutting, including test cuts and data download.

2-6 Printing and Cutting

2-7 Reloading the Media and Performing Cutting

Process for aligning print and cut positions using crop marks.

3. A Wide Variety of Operations

3-1 Replacing the Ink Cartridges

3-3 Setting the Location Where Printing Starts

3-5 Making Corrections for Printing

3-6 Making Corrections for Printing and Cutting

4. Maintenance

4-1 Cleaning the Printing Heads

Steps for cleaning printing heads to resolve print quality issues.

4-2 Cleaning Using the Cleaning Kit

Detailed guide on using the cleaning kit for head maintenance.

4-6 How to Replace the Blade

4-8 When Moving the Unit

5. Menus and Keys

5-2 Description of Menus

5-3 Description of Keys

6. What to Do If...

6-1 What to Do If...

Troubleshooting guide for common machine operational problems.

6-2 What to Do If an Error Message Appears

List of error messages and their corresponding solutions.