Roland SolJet PROII SC-540 - Display Menus Flowchart

90
Chapter 5 - Menus and Keys
5-1 Display Menus Flowchart
For details about each of the menus, see the "5-2 Description of Menus."
* Selecting the language for
screen messages
Load the media and press
When the power is turned
on for the first time, or turned
on after removing the ink
Roland SC-540
Ver.1.00
SETUP SHEET
ROLL EDGE PIECE
MENU LANGUAGE
ENGLISH
MENU LANGUAGE
JAPANESE
SETUP SHEET
ROLL
If [EDGE SENSE] is [DISABLE].
PRESS SETUP KEY
Printing/cutting area of the
loaded media (length).
*This is not displayed
when [ROLL] or [EDGE]
has been selected.
Printing/cutting area
of the loaded media
(width).
W1000mm L1230mm
NOW PROCESSING..
Top
menu
Press the [ENTER] key
to enable the setting.
Use or to select.
Press the [ENTER] key
to enable the setting.
Use or to select.
Roland SC-540
SOL INK LcLm
No ink is filled.
Roland SC-540
INK NOT FILLED
Attach the drain bottle,
and press [ENTER] key.
The system will execute
ink fill.
FILLING INK...
Select the installed ink type
and press the [ENTER] key.
SELECT INK TYPE
SOL INK LcLm
INSTALL
DRAIN BOTTLE
SET SOL CL-LIQUID
123456789101112
SET SOL CRT.
123456789101112
Insert SOL INK cartridge.