31
Chapter 1 - Getting Started
1-5 Switching On the Power for the First Time
Step 2 : Match the Machine to the Environment Where Installed
The machine performs automatic adjustment to optimize its state to the environment where it is used (temperature and
humidity).
Performing automatic adjustment reduces misalignment in the scanning direction (the direction of movement of the
carriage) during printing and cutting.
1
Press the [MENU] key, and press the [ ] key
to make the following screen appear on the dis-
play.
2
Press the [ENTER] key.
When material is loaded, the message shown
in the figure appears. Remove the material, then
press the [ENTER] key again.
The printing carriage moves and the printing length in
the carriage-movement direction is adjusted.
3
When automatic adjustment ends, the screen
returns to the display in step 1.
REMOVE THE SHEET
To Next Page
Loading...
