Roland SolJet PROII SC-540 - Stopping Printing or Cutting Operations; Pausing Printing or Cutting Operations

72
Chapter 3 - A Wide Variety of Operations
3-7 Stopping Printing or Cutting Operations
Stopping Printing or Cutting Operations
Stopping Printing or Cutting
1
Press the [PAUSE] key.
2
Halt transmission of printing instructions from
the computer.
3
Hold down the [SETUP] key for one second or
longer. Any remaining data is cleared.
Pausing Printing or Cutting Operations
Press the [PAUSE] key. The PAUSE LED lights up.
To resume printing
Press the [PAUSE] key again. The PAUSE LED goes out.
The PAUSE LED lights up
The SETUP LED flashes
The PAUSE LED lights up
The PAUSE LED goes out