71
Chapter 3 - A Wide Variety of Operations
3-6 Making Corrections for Printing and Cutting
6
Use the [ ] key to choose [FEED SETTING].
7
Press the [ ] key to make the following screen
appear on the display.
8
Enter the correction value read in step 5.
Select the correction value with the [ ] [ ]
key, and press the [ENTER] key.
9
Repeat steps 6 through 8 and enter the correc-
tion value of [SCAN SETTING].
FEED SETTING
0.0 mm 0.0 mm
PRINT - CUT ADJ.
FEED SETTING
To Next Page
Loading...
