Roland SolJet PROII SC-540 - Page 93

91
Chapter 5 - Menus and Keys
Press the [ENTER] key
to perform head cleaning
of A Group.
CLEANING
ALL
CLEANING
A GROUP
Press the [ENTER] key
to perform head cleaning
of B Group.
CLEANING
B GROUP
Press the [ENTER] key
to perform head cleaning
of C Group.
CLEANING
C GROUP
CLEANING
ALL
Press the [CLEANING] key
to perform all head cleaning.
Press the [ENTER] key
to perform head cleaning.
5-1 Display Menus Flowchart
MAINTENANCE
CLEANING
MAINTENANCE
WIPER REPLACE
• Move to the previous menu screen
or the next menu screen
• Select the value for a setting
• Moves the media (when specify-
ing the printing location)
• Move to a submenu screen
• Moves the printing carriage (when
specifying the printing location)
• Move to the previous menu screen
• Moves the printing carriage (when
specifying the printing location)
• Executes the menu
• Locks in the value for a setting
• Go back to the previous menu
screen.
• Advance to the next menu
screen (or move down one level).
• Select an item.
• Select the value for a setting
• Executes the menu
• Locks in the value for a setting
FORCE
50gf 50gf
SPEED
40cm/s 40cm/s
OFFSET
0.250mm 0.250mm
UP - SPEED
60cm/s 60cm/s
30gf to 300gf
（Instepof5gf）
1cm/s to 60cm/s
（Instepof1cm/s）
0.000mm to 1.500mm
（Instepof0.025mm）
1cm/s to 60cm/s
（Instepof1cm/s）