Roland SOLJET PROIII XC-540 User Manual


Press .
Press .

Press .
Use to set the value.
Press .

Press .
Press to go back to the original screen.
Description
You use this when ink dries poorly even when the print heater and dryer are used. Larger values produce
progressively slower movement of the media, enabling you to extend the drying time accordingly.
Printing time takes correspondingly longer.
You can also make this setting on the computer. When you have made the setting on the computer,
the computer's setting is used and the printer's setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF
Preventing Media from Coming Loose
Procedure

Press .
Press several times.

Press .
Use twice.

Press .
Use to set the value.
Press to enable the setting.

Press .
Press to go back to the original screen.
SUB MENU
SCAN INTERVAL
SCAN INTERVAL
OFF 1.0 sec
W 1346mm
SETUP SHEET
ROLL
MENU
SUB MENU
SUB MENU
VACUUM POWER
VACUUM POWER
AUTO
90%
W 1346mm
SETUP SHEET
ROLL
Chapter 6 Feature Reference
6-4 Accommodating Various Kinds of Media
Chapter 6 Feature Reference
95

Roland SOLJET PROIII XC-540 Specifications

General

Maximum Resolution	1440 dpi
Print Speed	Up to 32.3 m²/h (347.6 sq. ft./h)
Print Technology	Piezo inkjet
Media Width	210 to 1371 mm
Colors	CMYK
Media Handling	Roll feed
Connectivity	USB, Ethernet
Printing Technology	Piezoelectric inkjet
Print Resolution	1440 dpi
Maximum Print Width	1346 mm
Ink Colors	CMYK
Media Thickness	Maximum 1.0 mm
Interface	USB, Ethernet
Power Requirements	AC 100 to 120 V ±10% 50/60 Hz or AC 220 to 240 V ±10% 50/60 Hz
Ink Type	Eco-Sol MAX