Roland CAMM-1 PNC-1610 - How to Read this Manual

i
Copyright1995 © ROLAND DG CORPORATION.
Part 1 Startup
Installation, basic operation, and the procedures to follow when finished cutting are explained here. Please read this section if
you are using the PNC-1610 for the first time.
Part 2 User's Reference
Usage of the PNC-1610’s functions,and daily care are explained here.
Part 3 Technical Guide
This provides an overview of the instruction systems sent from the computer.
How to Read This Manual
This manual is organized in the following format. Please use it in the way that best matches your needs.