RC-20 May. 2001
12
State of the transmitting RC-20
"FLAT AMP SIMULATE" Waiting to transmit
* The RC-20 will briefly be in this state between data items.
* Since the guide sound data is divided into two parts, the RC-20 will
briefly be in this state even when transmitting only the guide sound
data.
"CENTER CANCEL" Now transmitting
"NORMAL" No data for transmission
State of the receiving RC-20
"FLAT AMP SIMULATE" Waiting for reception
* The RC-20 will briefly be in this state between data items.
* Since the guide sound data is divided into two parts, the RC-20 will
briefly be in this state even when receiving only the guide sound data.
"CENTER CANCEL" Now receiving
"NORMAL" Error
* An error will also occur if memory becomes full.
6. Repeat steps 4. -- 5. as necessary.
7. Turn off the power when you are finished.
To Next Page
Loading...
Need help?
General
