58
Using the Convenient Functions in Performances
Convenient Functions
Settings Not Saved in a Setup
The following settings cannot be saved to a Setup.
- Rec Setting (p. 95)
- [CONTROL] knob positions (values)
- System settings (p. 69)
System settings are saved each time one of these parameters is changed.
Setup <000>
When you press the ONE TOUCH [PIANO] button, and then press
CURSOR [ ] or [SETUP] to bring up the Setup screen, SETUP<000> is
displayed.
This Setup <000> is called “Piano Setup.”
fig.LCD
This SETUP<000> is the Setup containing the stored settings for ONE
TOUCH [PIANO]; the contents cannot be overwritten by pressing the
[WRITE] button as with other Setups.
When saving content changed from the ONE TOUCH [PIANO] settings,
write the settings to SETUP<001> or later.
RD-700_e.book 58 ページ ２００４年４月２６日 月曜日 午前１１時５４分
To Next Page
Loading...
