2
Read This First
Opening/Closing the Keyboard Cover
You must use both hands to open or close the keyboard cover.
* When opening or closing the keyboard cover, please be careful not to get your ngers pinched between the movable part and the panel. In
places where small children are present, make sure that an adult provides supervision and guidance.
Opening the Keyboard Cover
Use both hands to lift the edge of the lid, and push it away from
yourself.
* If you have any objects (papers, metal objects, etc.) placed on
top of the keyboard cover, do not open the cover. Otherwise,
such objects may slip inside the instrument, and then become
irrecoverable.
Closing the Keyboard Cover
Grasp and gently lower the edge of the lid with both hands.
Basic Operation of the RP102
Turning the Power On/O
Press the [
L
] (power) button to turn on the power.
If you hold down the [
L
] (power) button for one
second or longer, the power turns o.
Adjusting the Volume
Use the two volume buttons to adjust the volume.
Volume (up) button: Increases the volume.
Volume (down) button: Decreases the volume.
You can adjust the speaker volume when using the
built-in speakers, or the headphones volume when
headphones are connected.
* The number of indicators lit at the right of the
volume buttons changes according to the
volume. If all indicators are lit, the volume is at its
maximum. If all indicators are unlit, there will be no
sound.
Changing the Settings
By holding down the [Function] button and pressing
a key, you can select sounds or adjust the sensitivity
of the keyboard.
&
“Making Settings on the RP102” (p. 4)
The power to this unit will be turned o automatically after a predetermined
amount of time has passed since it was last used for playing music, or its
buttons or controls were operated (Auto O function). If you do not want the
power to be turned o automatically, disengage the Auto O function (p. 5).
5 Any settings that you are in the process of editing will be lost when the power
is turned o. If you have any settings that you want to keep, you should save
them beforehand.
5 To restore power, turn the power on again.
To Next Page
Loading...
