Roland SH-01A Installation Guide

Roland SH-01a “Colors” Sound Pack Installation Guide
Installation
Before transferring any Sound Sets to your Synth, please make a backup of
your sounds! !
Please follow these steps to transfer the Desert Sound Pack to your SH-01a.!
To mount the SH-01A to your desktop follow this procedure !
1. Holding down [MENU] button, power up the SH-01A !
2. Connect your computer to the SH-01A USB port via USB cable !
3. Open the SH-01A drive which has mounted to your desktop. "
To transfer patches from your computer into the SH-01a !
1. Follow the above procedure for mounting the SH-01A "
2. Copy the patches you’d like to check out into the “RESTORE” folder on "
the SH-01A drive. "
3. When copying is completed, eject the SH-01A drive. !
4. IMPORTANT - Before power cycling the module press the [MENU] button !

Roland SH-01A Specifications

General

Product type	Digital synthesizer
Product color	Gray
Keyboard number of keys	-
Maximum polyphony (notes)	4
Display type	LED
Built-in display	Yes
USB ports quantity	1
Battery type	AA
Power source type	Battery

Weight and Dimensions

Depth	128 mm
Width	300 mm
Height	46 mm
Weight	965 g