20
2. Included Items
The following items are packed together with the unit. Make sure they are all present and accounted for.
Stay (1)
Dancer roller (1) Stand leg (left) (1) Stand leg (right) (1)
Rail slider (1) Paper tube (1)
Shafts (2) Power cord (1) Arm (1)
Ink cartridge trays (2)
Media holder / Media
holder retaining screw (two
for right and left each)
Media anges ( for 2 inches)
(one for right and left each)
Shaft clamps (2)
Media clamps*
(one for right and left each)
Hexagonal wrench (1) Bolts (24) Washers (8)
* The media clamp is attached to the printer unit when shipped.
To Next Page
Loading...
