Roland VersaCamm VP-540 - Service Manual

SERVICE NOTES
70046-06
TERMS OF USE
Users of this Service Note shall be deemed to agree with the following Terms of Use.
1. USERS
This Service Note is only for authorized persons with user ID and password issued by Roland DG Corporation.
2. PURPOSE
Authorized persons can use this Service Note only for the purposes of selling and providing to the customers
maintenance service of VP-540/VP-300.
3. REUSE
Authorized persons shall not disclose, transfer, rent or distribute this Service Note to, or allow this Service Note
to be used in any manner by, any third party other than authorized persons.
4. REPRODUCTION
Authorized persons shall not copy, change or alter this Service Note without permission of Roland DG
Corporation.
5. EFFECT OF VIOLATION
Regardless of circumstances, we will vigorously respond to any violation hereof, through legal action.
Confi dential
Copyright © 2008 ROLAND DG CORPORATION

Roland VersaCamm VP-540 Specifications

General

Print Technology	Piezo inkjet
Ink Type	Eco-Sol MAX
Max Print Width	1371 mm (54 in.)
Resolution	Up to 1440 dpi
Media Width	54 inches
Cutting Speed	10 to 300 mm/s
Interface	USB
Power Requirements	100-240V, 50/60Hz
Media Handling	Roll feed
Ink Colors	CMYK
Media Thickness	Maximum 1.0 mm
Media Types	Vinyl, banner, canvas, paper, heat transfer material
Weight	344 lb (156 kg)