Temperature: 5 to 40 C (41 to 104 F), humidity: 20 to 80%RH (non-condensing)
Piezoelectric inkjet
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for
cutting
Maximum 180 mm (7 in.)
50.8 mm (2 in.) or 76.2 mm (3 in.)
220-cc cartridge / 440-cc cartridge
Four colors (cyan, magenta, yellow, and black)
Maximum 1,440 dpi
10 to 300 mm/s
30 to 200 gf
Roland CAMM-1 series compatible
0 to 1.5 mm (0 to 0.059 in)
0.025 mm/step
Error of less than 0.3% of distance traveled, or 0.3 mm, whichever is greater
Error of less than 0.4% of distance traveled, or 0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CALIBRA-
TION] - [CUTTING ADJ.] has been made): Error of less than 0.2% of distance
traveled, or 0.1 mm, whichever is greater
0.1 mm or less
0.5 mm or less
Error of less than 0.5% of distance traveled, or 3 mm, whichever is greater
Print heater, setting range for the preset temperature: 30 to 45 C (86 to 112 F)
Dryer, setting range for the preset temperature: 30 to 50 C (86 to 122 F)
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep feature
Temperature: 15 to 32 C (59 to 90 F) (20 C [68 F] or more recommended),
humidity: 35 to 80%RH (non-condensing)
Exclusive stands, power cord, blade, blade holder, media clamps, media flanges,
replacement blade for separating knife, cleaning kit, software RIP, User's Manual,
etc.
VP-540
210 to 1,371 mm (8.3 to 54 in.)
Maximum 30 kg (66 lb.)
Maximum 1,346 mm (53 in.)
AC 100 to 120 V 10%, 8.3 A, 50/60 Hz or
AC 220 to 240 V 10%, 4.3 A, 50/60 Hz
Approx. 1,110 W
Approx. 34 W
64 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
2,310 (W) x 740 (D) x 1,125 (H) mm
(90.9 (W) x 29.1 (D) x 44.3 (H) in.)
109 kg (240 lb.)
VP-300
182 to 762 mm (7.2 to 30 in.)
Maximum 20 kg (44 lb.)
Maximum 736 mm (29 in.)
AC 100 to 120 V 10%, 5.8 A, 50/60 Hz or
AC 220 to 240 V 10%, 3.0 A, 50/60 Hz
Approx. 780 W
Approx. 33W
64 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
1,700 (W) x 740 (D) x 1,125 (H) mm
(66.9 (W) x 29.1 (D) x 44.3 (H) in.)
87.5 kg (193 lb.)
Printing technology
Media Width
Thickness
Roll outer diameter
Roll weight
Core diameter
Printing/cutting width (*1)
Ink cartridges Types
Colors
Printing resolution (dots per inch)
Cutting speed
Blade force
Cutting blade Type
Blade offset
Software resolution (when cutting)
Distance accuracy (when printing) (*2)
(*3)
Distance accuracy (when cutting) (*3)
Repeatability (when cutting) (*3) (*4)
Alignment accuracy for printing and cut-
ting (*3) (*5)
Alignment accuracy for printing and cut-
ting when reloading media (*3) (*6)
Media heating system (*7)
Connectivity
Power-saving function
Power requirements
Power consumption
During operation
Sleep mode
Acoustic noise level
During operation
During standby
Dimensions (with stand) (*8)
Weight (with stand)
Environmental Power on (*9)
Power off
Accessories
*1
The length of printing or cutting is subject to the limitations of the program.
*2
With Roland PET film, print travel: 1 m
Temperature: 25 C (77 F), humidity: 50%
To Next Page
Loading...
Need help?
General
