Roland SoundCanvas SC-88 Pro User Manual

■ Copying or Exchanging settings between Parts / Initializing Part settings
The settings of the selected Part can be copied to another Part or initialized, and you
can exchange settings between parts. By using these functions, you can create sounds
more efficiently.
● Procedure
1. Make sure that the [ALL] indicator is dark.
If it is lit, press the [ALL] button to make it go dark.
2. Use PART [ll
ll
][rr
rr
] to select the source Part.
3. Use the following procedure.
(A) Copy: While pressing [SELECT], press LEVEL [l].
The display will ask “Copy A01ÈA02?”
Use INSTRUMENT [l][r] to select the copy destination Part.
(B) Initialize: While pressing [SELECT], press LEVEL [r].
The display will ask “Clear A01?”
(C) Exchange: While pressing [SELECT], press PAN [l].
The display will ask “Exchg A01ÍÈA02?”
Use INSTRUMENT [l][r] to select the Part to be exchanged.
4. To execute the specified operation, press the [ALL] button.
To cancel without executing, press the [MUTE] button.
* It is not possible to copy or exchange Drum Parts.
INSTRUMENTPA RT
LEVEL
PAN
REVERB
CHORUS
KEY SHIFT
MIDI CH
SELECT
EFX ON/OFF
USER
INST
VIB RATE
AT TACK
VIB DEPTH
CUTOFF
DECAY
VIB DELAY
RESONANCE
RELEASE
DELAY
EFX VALUEEFX PARAMEFX TYPE
ALL
MUTE
SC
-
55
MAP
SC
-
88
MAP
1
2
3-A Copy
3-B Clear Part
3-C Exchange
4
Chapter 5. Convenient functions
106

Roland SoundCanvas SC-88 Pro Specifications

Sound Specifications

maximum polyphony	64 voices
preset sounds	1117
drum sound set	42

User Sound Settings

user sounds	256
user drum sound set	2
user effect	64

Effects

reverb types	8
chorus types	8
delay types	10

Display

display size	70.6 x 24.5 mm
display type	backlit LCD

Power

power supply	AC117V, AC230V or 240V
power consumption	16W (AC117V), 16W (230V/240V)

Weight and Dimensions

dimensions (mm)	218 (W) x 250 (D) x 72 (H)
dimensions (inches)	8-5/8 (W) x 9-7/8 (D) x 2-7/8 (H)
weight	2.6 kg