● Setting procedure
1. Hold down [SELECT], and press [ALL].
The [ALL] button will blink, and the SC-88-compatibility mode will be turned on.
At this time if you press the [SC-88 MAP] button, the [SC-88 MAP] button will light and
the SC-88 map will be selected. Alternatively, if you press the [SC-55 MAP] button, the
[SC-55 MAP] button will light and the SC-55 map will be selected.
2. To turn off SC-88-compatibility mode, hold down [SELECT] and press
[ALL].
To maintain compatibility with various types of song data such as GM/GS, this
unit has three sound maps. These can be accessed as follows.
Type of data Map for playback Map setting
GM/GS data Native map Default setting
” SC-55 map [SC-55MAP]: ON
” SC-88 map [SC-88MAP]: ON
Data for SC-88 (LSB0) Native map Default setting
” (LSB0) SC-88 map [SC-88MAP]: ON
Data for both this unit/SC-88 (LSB0) SC-88 map [SC-88MAP]: ON
Data for this unit Native map Default setting
For example if you wish to playback GM/GS data using Native map, select the
default map setting.
To Next Page
Loading...
