Roland SP-300i - Installing the Shafts

3. Assembling and Installing
22

Place the machine on the stand and secure it in place.
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
Installing the Shafts
Procedure

Fit the stoppers onto a shaft.
Attach them to only one of the two.
Stopper
Shaft
Orient so that this
side faces outward.
Orient so that this side
faces outward.
Loosen the
screws
Loosen the
screws
Align with the arms.
Bolts
2pcs
Bolts
2pcs
Bolts
2pcs
Bolts
2pcs