Roland Super JX-10 - Page 19

c.
Chase Play
The Chase
Play function
makes it
possible
to out-
put the Lower
sound slightly
later
than
the Upper
sound. This function,
however,
is available
just in
the Dual
Mode.
Depending
on
the delaying time
and the
Tone in
use, the
effects created
differ;
delay-like
effect,
sound-on-sound
like effect
etc.
PROCEDURE
Push ON/OFF
of the Chase
Play Buttons
®.
The corresponding
indicator
wili light
up, showing
that
now the
Chase Play function
is turned
on.
(2)
Set the
following
3 functions: Time, Level
and
Mode so that
the
..'^isired
effect will
be obtained.
The "Level"
and "Mode" are alternately
selected
by pressing
the FUNCTION
of the Chase Play But-
tons. The
Display shows the function selected.
The
"Time" function
can be selected by pressing
the TIME of
the Chase Piay Buttons.
The
value of
the
selected function
can be changed by using the
Q Dial.
1) Level
This sets
the level of the delayed
sound
(=
lower
sound).
Rotating the
a Dial, set the value
you
like.
The
value
changes from
00 to 99, and the higher
number
sets higher level.
D
r
urinjtc.
run
I
i^czu
tit.
k^
Jfi^:
00 to 99
19