3}
Program
Change ON/OFF
The Program
Change
ON/OFF
function can select
whether
to use Program
Change
or not. On/Off
can be set
independently for the upper and the
lower.
Call the upper or lower
using the
corresponding
number
(21 for Upper,
31 for Lower), then
select
ON or
OFF using the a Dial.
4}
Other
MIDI Functions
The following
MIDI Functions
can be set
to ON or
OFF using
the a Dial.
Aftertoudi
Upper
Number
22
Lower
Number 32
Bender
Upper
Number 24
Lower
Number 34
Modulation
Upper
Number
25
Lower
Number 35
Portamento
Upper
Number
26
Lower
Number
36
Hold
Upper
Number 27
Lower
Number
37
Volume
Upper
Number
28
Lower
Number 38
The
Volume On/OFF
can be set with the a Dial, but
selecting
the MIDI Volume
with the
Control Assign
will
automatically
set it to ON.
*
Local
Upper
Number
23
Lower
Number
33
Usually
this
function should be set to
ON.
Local OFF separates the
keyboard section from
the synthesizer section. Therefore, the
keyboard
messages sent out from the
MIDI OUT does not
cause the JX-1 to
sound. The JX-1 0's synthesizer
section is
played
with
the messages
fed itno
the
MIDI IN.
*
For assigning the
Function Number of a MIDI
message,
the a Dial can be used instead of the
Ten Keys. After pushing the MIDI then
PARAM,
rotate
the a
Dial, and the Function shown in the
Display will change in sequence. When the
Function you wish to
edit appears in the Display,
push the VALUE of the Edit Buttons, then
change value with the a
Dial. However, to
con-
tinue
to
edit other Function, be sure to push the
PARAM button,
then
call the
Function you want
by
using the a Dial.
*
To cancel the
MIDI function editing mode, sim-
ply
push the
MIDI of the Edit Buttons
®.
•
System Exclusive
This
message is
not affected by channel setting.
Call it by assigning
its Function Number 11, then
turn it on or
off with the
a Dial.
59
To Next Page
Loading...
