ADVANCED
COURSE
(Cont'd)
(j)
FUNCTION
Button
This butloii will perform different
functions
according
to
tfie
RUN/STOP condition and itie
MODE
Selector
@
position.
Wlien
stopped in the
PATTERN WRITE Mode,
this button has no effect.
When running
in the PATTERN WRITE Mode,
pressing the FUNCTION butlon(J)will
mennorize the
SCALE Selector(T)posilion and
virtually
display
the
first step of each quarter
note beat using the 16 LED
indicators (L)and
allows you to set the
last step by pressing the
SELECTOR Switch (K).
In the
TRACK
PLAY
and
TRACK WRITE
MODE,
pressing
the
FUNCTION button (j)will
display the
current bar number witfiin the
Track using the LED
indicators
(L).
While the
FUNCTION button
(j) is
being held down, the
SELECTOR Switches (K) and tfieir
associated
LED
indicators (L) may be used
to
change the
current bar number.
Finally, while the rhythm
Is
stopped,
hold the FUNCTION button
(j)
down while
pressing eitlier the CLEAR/RESET
(f)
or PATTERN GROUP (N) to display the bar
number
of the
D.C. or D.S. sign, respectively
using the LED
indicators
(L).
When
running
in the
TRACK PLAY and
TRACK WRITE
MODE, pressing the
FUNC-
TION
button
(j)
will display tlie
current bar
running using
the
LED
indicators
(L).
(l) LED Indicators
The
16
LED
Indicators
(T) located directly
above
the
SELECTOR Switches ©are
used to
indicate
the Rhythm Pattern
number.
Steps
within
a Rhyttim
Pattern, or Bar Numbers,
depending
on the use of
the other
TR-606
controls.
Details of these
different
applications
and reading
Bar numbers
are given
in
the
Ope-
ration
section of
this manual.
(k) SELECTOR Switches
These
16
switches will
perform
different
func-
tions
according
lo (he
RUN/STOP
condition
and the
MODE Seleclor
position.
When
stopped in the
PATTERN
WRITE and
PATTERN PLAY
Mode, the
SELECTOR
Switches (K)
determine
whetlter
individual
Rhythm
Pattern
or
Chained
Rhythm
Pattern
will
begin when the
RUN/STOP
button
(fi) is
pressed.
A
maximum of four
adjacent
Rhythm
Patterns within the
blocks of 1-4,
5—8,
9-12,
and
13-16 may
be chained
together
to perform
as one
complex Rhythm
Pattern
and may
be
played
once or repeated
as a single
unit.
When
running in
the
PATTERN
WRITE
Mode,
the
SELECTOR
Switches (R) are used
to
write
the
instrument selected
with the
TRACK/
INSTRUMENT seleclor
(C) into specific
steps
of
the Rhythm
Pattern.
Details of this
pro-
cedure
are given
in the Operation
section of
this
manual.
Wlien
stopped
in the
TRACK PLAY and
TRACK WRITE
MODE,
holding the
FUNC-
TION button
@down
allows
the SELECTOR
Switches
(K) to be used
to select
any specific
bar number
within
that track.
When
running
in
the
TRACK
WRITE
Mode,
the
SELECTOR
Switches
(K) may be used
to select
individual flhythm
Patterns
or to designate
Chains of
Rhythm Patterns,
f^ote: The
Rhythm
Patterns
heard here are
not written
into the
Track
memory
until the TAP
switch (M)
is
used.
(n) pattern GROUP
Buttori
Depending on the
MODE
Selector
(§)
position
and
the
RUN/STOP condition,
this button
will
perform
the
following functions:
When
stopped in the
PATTERN
WRITE and
PATTERN
PLAY MODE,
and when stopped
in
the
TRACK WRITE Mode the
PATTERN
GROUP
button
(N) switches tlie
TR
606's
inemories
between
the
16
Rliythm
Patterns
in
PATTERN GROUP
(fi)
I
and the
16
Rhyihm
Patterns
in
PATTERN GROUP
(g)
II.
When
slopped in the
TRACK PLAY Mode, the
Pattern
Group
number
which has been
to
program
the Track in the
PATTERN WRITE
Mode
will be selected automatically. Tlie
PATTERN
GROUP
button
(H) itself will have
no effect.
When
stopped in the TRACK WRITE or
TRACK PLAY, hold the PATTERN
GROUP
button
(N) down while pressing the
FUNCTION
button
(J), and the LED
indicators
(t)
will
display the
bar
number
to which
the
g-
sign
has
been assigned.
When
stopped
in
the
TRACK WRITE Mode,
the
PATTERN GROUP button
(N) selects the
PATTERN GROUP
to
be written
into
tlial
Track
Memory.
When
running
in the
TRACK WRITE
Mode,
tfie
PATTERN GROUP button
(N)
will
assign
the current
bar
as tlie
S-
sign bar
in the Track
memory.
(M) TAP Button
Depending
on
the
MODE Selector
(B)
position
and the
RUN/STOP condition, this button
will
perform the following
functions:
When running
in
the
PATTERN WRITE Mode,
this
button
will
perform
the real time Tap pro-
gramming.
When running
in
the
PATTERN PLAY Mode,
ttie TAP button
(M) acts as a STEP RESET
button
(M) to
cause the Running Rhythm
Pattern
to
immediately begin again from the
first
Step
of the current Rhythm.
When
stopped in the TRACK PLAY or TRACK
WRITE
Mode, the
TAP
button
(M)
will advance
one bar
furtlier
into the selected
Track.
18
To Next Page
Loading...
