Roland TrueVIS VG2-640 - Basic Maintenance Knowledge; Types and Timing of Maintenance

6
1.Introduction
Basic Maintenance Knowledge
Types and Timing of Maintenance
To use this machine under its opmal condions, it is important to perform the appropriate mainte-
nance at the appropriate mes.
Regular maintenance
These are the maintenance items that are required on a daily basis.
Timing Category Item Page
Aer daily operaons Cleaning the machine
Media path P.10
Knife carriage roller P.11
When the discharged uid
is ready to overow
Disposing of discharged uid
Disposal due to a message P.12
Disposal due to the drain bot-
tle capacity
P.13
When dot drop-out or dot
displacement occurs
Cleaning of the print heads
Normal cleaning P.15
Medium cleaning P.18
Powerful cleaning P.20
Manual cleaning P.23
If colors are uneven Eliminang uneven colors Shaking the pouch trays P.31
Advanced maintenance
These maintenance methods consume a large amount of ink. Thoroughly read the explanaon in
the User's Manual, and then perform the operaon at the appropriate point in me.
"
User's Manual (hps://webmanual.rolanddg.com/VG2-640)
Timing Category Item
When uneven colors are not resolved
Eliminang uneven colors,
dot drop-out, and dot
displacement
Damper cleaning
* Only when the ink type is
CMYKLcLmLkW
When manual cleaning is not eecve
Super cleaning
When damper cleaning is not eecve