Roland UA-30 User Manual

Owner’s Manual
Contents
Basic operation of Peak LE 3
What is Peak LE? 3
Installing Peak LE 3
Connecting the UA-30 5
Starting up Peak LE 5
Opening a file 6
Playing back 6
Recording 7
Editing 9
Exiting Peak LE 10
How to Register Peak LE
(Receiving the Product Authorization Code)
10
Troubleshooting 12
Copyright © 2000 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
02560812 ’00-12-CE2-11N
Your Peak LE serial number is
The above serial number is necessary for installing Peak LE. (p. 3)
Make sure to put it away for safekeeping, along with your CD-ROM.
You will also need the Authorization Code in order to continue using
Peak LE. For further information, refer to p. 10.

Roland UA-30 Specifications

General

Type	Audio Interface
Input Channels	2
Output Channels	2
Sample Rate	44.1 kHz, 48 kHz
Bit Depth	16-bit
Connectivity	USB
Headphone Output	1 x 1/4" TRS
Dimensions	Approx. 150 x 100 x 40 mm
Channels	2-in/2-out

Summary

Basic Operation of Peak LE

What is Peak LE?

Defines Peak LE as Macintosh waveform editing software for recording, playback, and editing.

Installing Peak LE

Provides step-by-step instructions for installing Peak LE software from the CD-ROM.

Connecting the UA-30

Hardware Connection

Guides users on connecting the UA-30 hardware to the computer and audio devices.

Starting Up Peak LE

Launching the Application

Details the process of launching the Peak LE application after installation.

Opening a File

Loading Sample Data

Explains how to open sample audio data files from the CD-ROM.

Playing Back Audio

Using Playback Controls

Describes how to use the toolbar buttons to play back audio recordings.

Recording Audio

Setting Up Recording

Covers the process of setting up audio recordings, including device and sample format.

Editing Waveforms

Selecting Regions

Details how to select specific parts of the waveform for editing.

Zooming Waveform Display

Explains how to adjust the magnification of the waveform display.

Using Editing Functions

Lists various commands available for editing waveforms in Peak LE.

Exiting Peak LE

Closing the Application

Instructions on how to close and quit the Peak LE application.

How to Register Peak LE

Registering by Email

Explains the process of registering Peak LE via email to obtain an authorization code.

Registering by Mail or Fax

Using Registration Cards

Details the process of registering Peak LE using physical registration cards.

Troubleshooting

Noise During Recording

Addresses issues of noise occurring when recording audio, and potential solutions.

Cannot Record Audio

Provides guidance on resolving problems where audio recording fails.

Checking USB Audio Driver Version

Provides steps to identify the version of the USB audio driver used by the UA-30.

Support Service Information

Directs users to BIAS web sites for further support and upgrade services.