Roland V-Drums TD-20 - Connecting the Pads and Pedals

18
Feb.2004
3. Press the [F1 SAVE] button; the following appears in the LCD display.
fig.save-3
At this point, the [+/-] buttons or [VALUE] dial can be used to change
the backup number for the data to be saved (up to a maximum of 8
numbers can be saved simultaneously).
4. Press the [F5 SAVE] button; the following appears in the LCD display.
fig.save-4
5. To execute the save, press the [F5 EXECUTE] button.
The save is executed.
To cancel the save, press the [F1 CANCEL] button.
When the save is finished, “Completed!” temporarily appears, and
The LCD display returns to its original state.
Data Restore
Use the Data Backup to restore the saved user data to the TD-20’s User Area
1. Insert the memory card containing the saved data in the slot.
2. Press the [CARD] button; the following appears in the LCD display.
fig.save-1
3. Press the [F2 LOAD] button; the following appears in the LCD display.
fig.save-5
At this point, the [+/-] buttons or [VALUE] dial can be used to select the
backup number in the Data Backup.
4. Press the [F5 LOAD] button; the following appears in the LCD display.
fig.save-6
5. To execute the load, press the [F5 EXECUTE] button.
Loading is executed.
To cancel loading, press the [F1 CANCEL] button.
When loading is finished, “Completed!” temporarily appears, and
The LCD display returns to its original state.