Roland V-drums - Page 40

The World’s Finest Electronic Drums and Percussion. PERIOD.
38
Reinitializing the HPD-15
➜ Press [System] (A) button 1x
➜ Repeatedly press the right [Parameter] (B) button
until the display reads “System Reset”.
➜ Turn the [Value Wheel] until the display reads “All”.
➜ Press the [Write] (D) button 2x’s.
That’s all there is to it ...
The HandSonic 15 is reinitialized!
A
B
C
D
Reinitializing the HPD-10
➜ While holding down the [SHIFT] button (A), press
{EDIT}.
➜ Press the [q] cursor button until you see
“Factory Reset.” The choices are “SETUP, ALL
KITS, ALL,” select “ALL.”
➜ To execute the reset, press the [q] button again,
a conrmation screen will appear.
➜ Press the “OK” button [4] to execute reset.
➜ Press the [MENU] button (A) so it’s lit.
➜ Use the SEL [p] [q] buttons (B) to choose
“9 OPTIONS,” and press the [OK] button (C).
➜ In the “Options” screen, press the SEL [q] button
a number of times to choose “Factory Reset,” and
press the [OK] button (C).
➜ Use the [-/+] dial (D) to select the setting “All.”
➜ Press the SEL [q] button.
A conrmation message appears.
➜ Press the [OK] button (C).
Reinitializing the TD-4
A
C
B
[
D
A
B
C
4