Roland V-Studio VS-20 - Arm the Desired Track for Recording

30
From initial settings to recording
We’ll arm track 1 for recording (i.e. put it in record-ready mode).
1. Press the V-STUDIO 20 hardware’s TRACK SELECT [1] button.
The V-STUDIO 20’s TRACK SELECT [1] button and Guitar Tracks 4’s track 1 button will both light, indicating that this
track is armed for recording.
You can also arm the track by clicking the TRACK SELECT button on Track 1 in Guitar Tracks.
6. Arm the desired track for recording.
VS-20_e.book 30 ページ ２０１０年１月１８日 月曜日 午前９時８分