Roland VersaEXPRESS RF-640 Manual

Ink Switching Method
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this
manual completely and store it in a safe location.
 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
 The contents of this operation manual and the specications of this product are subject to change without notice.
 The operation manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors,
please inform us.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article
made using this product.
About this Manual
This manual explains how to switch the ink being used from ECO-SOL MAX 2 ink (hereinafter called MAX 2 ink) to ECO-SOL
MAX 3 ink (hereinafter called MAX 3 ink).*
To prevent the MAX 2 ink and the MAX 3 ink from mixing, perform operations according to the procedures given in this manual.
* Colors with MAX 3 ink are dierent than with MAX 2 ink.
ECO-SOL MAX 2 ECO-SOL MAX 3

Roland VersaEXPRESS RF-640 Specifications

General

Maximum Resolution	1440 dpi
Maximum Print Width	1615 mm (63.6 in.)
Media Width	259 to 1625 mm (10.2 to 64 in.)
Power Requirements	AC 100 to 240 V ± 10%, 50/60 Hz
Print Technology	Piezoelectric Inkjet
Ink Type	Eco-Sol MAX 2
Ink Colors	CMYK
Connectivity	Ethernet
Print Speed	Up to 48.5 m²/h (521 ft²/h)
Media Thickness	Maximum 1.0 mm with liner
Media Handling	Roll feed
Interface	Ethernet, USB
Weight	140 kg (309 lb)
Operating Systems	Windows 7/8/10