Roland VersaUV LEF2-300 Setup Guide

• Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual
completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specications of this product and the contents of this operation manual are subject to change without notice.
• This manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors, please inform
Roland DG Corporation.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article
made using this product.
R2-200324
Setup Guide
This document contains information that is not included in the LEF2-300 Setup Guide and is specic to the LEF2-300D (LEF2-300 +
D-KIT). Read this document together with the LEF2-300 Setup Guide.
The D-KIT is an option that extends the height limit of the LEF2-300 to 200mm. This option can be selected at the time that a new
LEF2-300 unit is purchased.

Roland VersaUV LEF2-300 Specifications

General

Printing Technology	Piezo inkjet
Ink Configuration	CMYK + White + Clear
Ink Colors	Cyan, Magenta, Yellow, Black, White, Clear
Connectivity	USB 2.0, Ethernet
Maximum Print Width	780 mm
Maximum Media Width	800 mm
Print Resolution	1440 x 1440 dpi
Media Thickness	Up to 200 mm
Maximum Media Thickness	50 mm
Ink Type	UV Ink
Ink Droplet Size	Variable dot
Power Supply	100-240V AC, 50/60Hz
Power Requirements	100-240V AC, 50/60Hz
Power Consumption	600W
Dimensions	1, 318 (W) x 983 (D) x 705 (H) mm 51.9 (W) x 38.7 (D) x 27.8 (H) in.
Dimensions (W x D x H)	1190 x 940 x 290 mm
Weight	128 kg